Allegro MicroSystems, LLC Introduces New Three-Wire, True Zero-Speed, Differential Peak-Detecting Sensor IC

Allegro MicroSystems's picture
Printer-friendly versionPrinter-friendly versionPDF versionPDF version

Designed for Motor Bike Tachometer Applications

Tuesday, April 01, 2014

Worcester, MA – Allegro MicroSystems, LLC introduces a new optimized Hall-effect sensing IC that provides a user-friendly solution for digital ring-magnet sensing, or when coupled with a magnet, ferromagnetic target sensing, in three-wire applications. The small device package can be easily assembled into applications for use in conjunction with a wide variety of target shapes and sizes. Allegro’s A1468 sensor IC is targeted at the automotive market and is designed and optimized for motor bike applications.

The integrated circuit incorporates dual Hall-effect elements with a 2.2 mm spacing and signal processing that switches in response to differential magnetic signals created by ring magnet poles. The circuitry contains a sophisticated digital circuit to reduce system offsets, to calibrate the gain for air gap – independent switch points, and to achieve true zero-speed operation through peak detecting algorithm. Signal optimization occurs at power-on through the combination of offset and gain adjust, and is maintained throughout the operating time with the use of a running-mode calibration. The running-mode calibration provides immunity to environmental effects such as micro-oscillations of the target or sudden air gap changes. The device is ideally suited to obtaining speed and duty cycle information in ring-magnet–based speed, position, and timing applications, such as in speedometers.

Allegro’s A1468LK-T is available in a 4-pin through hole SIP package (suffix K).



Allegro MicroSystems, LLC is a leader in developing, manufacturing and marketing high-performance semiconductors. Allegro's innovative solutions serve high-growth applications within the automotive market, with additional focus on office automation, industrial, and consumer/communications solutions. Allegro is headquartered in Worcester, Massachusetts (USA) with design, applications, and sales support centers located worldwide. Further information about Allegro can be found at www.allegromicro.com.

 


Editorial Contact:

Stephanie Fennelly

Director - Marketing Communications

Tel: (508) 854-5363
sfennelly@allegromicro.com

News Source : Allegro MicroSystems, LLC Introduces New Three-Wire, True Zero-Speed, Differential Peak-Detecting Sensor IC

Copy this html code to your website/blog to embed this press release.