Brass Pipe Fittings Launches Flexible Entry Boots and Fittings

Brass Pipe Fittings made Flexible Entry Boots are  reliable, safe seals for pipe and conduit entries into underground containment sumps.These entry boots allow for angled pipe entries and have no  exposed metal parts to the underground environment.These entry boots are  available in a variety of sizes and  designs to accommodate rigid and flexible piping, ducting and access pipe.

 

Angled Entries:  

Primary pipe and access pipe entering the containment sumps may not be perpendicular with the sump wall. Angled entries are generally a result of directional plumbing restrictions on the inside of the containment chamber due to space limitations.Flexible entry boots are flexible enough to permit angled pipe or conduit entries (on two axes) into the sidewall of a containment chamber. All flexible entry boots permit angled entries up to a 15-degree angle off the perpendicular center line in any direction without leaking or putting undue stress on the pipe or conduit seal.

 

Specifications:

Specifications for  Single Flexible Entry Boot and Fitting

STF -0751 1/2", 3/4" and 1" Conduit Entry Boot Fitting 2-3/8" 6.03

STF-0150 1.5" Entry Boot Fitting for 1.5" DW FlexWorks Pipe 3-3/4" 9.52

STF-0200 2" Entry Boot Fitting for 2" DW FlexWorks Pipe or 2" LCX 3-3/4" 9.52

STFF-0200F 2" Entry Boot Fitting for 2" Rigid Pipe 3-3/4" 9.52

STFF-0300 3" Entry Boot Fitting for 3" DW FlexWorks Pipe or

3" Rigid Pipe/LCX 5" 12.7

STF-0400 4" Entry Boot Fitting for 4" Rigid Pipe/AXP Pipe 5-1/2" 13.97

STF-0600 6" Entry Boot Fitting for 6" Rigid Pipe Saber Saw

STF -7400 4" Sump Access Boot 5" 12.7

 

Sump Entry: 

Flexible entry boots have been tested  to withstand a minimum of 6' of liquid  head pressure. These seals provide a studded flange connection to create a positive and secure seal where the  rubber contacts the sump wall and also around the pipe or conduit. Tightening  down on a series of stud fasteners with  a compression ring provides a high compression mechanical seal compared  to screw on type bulkhead seals.

You may visit their site at http://www.brass-pipe-fittings.com and for products http://www.brass-pipe-fittings.com/products.html  and http://www.brass-pipe-fittings.com/resources.html for more details.