Terex Material Handling has been awarded a contract by Airbus to supply Demag crane installations for its new assembly facility in Mobile, Alabama. Ten process cranes will be employed for the final assembly of A320 Family aircraft in three production hangars. Measuring up to 66.5 m (218 ft.) in length and offering maximum load capacities of some 25 tonnes, the process cranes feature up to four suspensions for safe and precise handling of sensitive aircraft components.
Lutz Dowy, Vice President Global Product Management & Process Cranes at Terex Material Handling, explains: “We supply crane systems that are tailored to meet the demands of aircraft logistics and assembly operations. We are providing Airbus with a strong crane concept for a continuous intralogistic solution.”
John Paxton, Vice President and General Manager of Terex Material Handling North America, states, “Our unique local U.S. capability to deliver complex solutions coupled with proven worldwide successes with similar Airbus projects were key factors to winning this order. We are very pleased that Airbus chose Terex Material Handling North America to be their partner on this critical project.”
The heart of the new Airbus plant is the 255 m (836.6 ft.) long Final Assembly Line hangar, where five process cranes will operate in a series of three assembly zones. In zone 1, three cranes will be installed for transporting fuselages for the fuselage assembly operation. Featuring quadruple suspension arrangements, the double-girder suspension cranes have a total length of 66.5 m (218 ft.) and travel on a common crane runway. Installed on each of the crane girders is a main trolley, which accommodates four Demag 6.3 t hoist units that operate on two traversing bridges. Thanks to the precise control of 12 motion axes per crane, Airbus will be able to position the individual fuselage sections that measure 3.96 m (13 ft.) in diameter with an extremely high level of accuracy.
To ensure that the fuselage segments are gently picked up, the cranes will be equipped with a semi-automatic rope tensioning system. Once the four hoist units have each lifted a specified load of 300 kg, they continue to lift the suspended payload in a synchronized motion to avoid any flexing of the sensitive aircraft components. After all fuselage segments have been assembled, the cranes transport the complete fuselage to the next assembly station. To do this, both process cranes and their eight hoist units operate under synchronized control.
In zone two, two wing-handling cranes will be responsible for the lifting motions during the wing assembly process. Both process cranes are each equipped with two traversing bridges with a total of three 3.2 t hoist units, which pick up the waiting wings and position them precisely as required for the assembly operation.
Finally, in zone three, an assembly crane with a 5 t Demag standard-headroom traveling hoist unit will be used for the assembly of the tail units and handling other components.
Two identical Demag process cranes of single-girder design also will be used in the final phase hangar. These cranes feature multiple suspensions and each operates on four crane runways that are arranged parallel to each other. With a length of 40 m (131.2 ft.) and a load capacity of 5 t, these crane installations are designed for transporting the components swiftly to where they are needed for installation on the aircraft.
The individual parts of the aircraft, such as the fuselage, wings and tail unit, are pre-assembled at locations throughout Airbus’ European production network and will be transported to the transhipment hangar in Mobile. Two single-girder suspension cranes, each equipped with two 7.5 t Demag hoist units, operate in this hangar, which is upstream of the assembly process. The cranes are employed as stand-alone units as well as in tandem mode for handling the incoming aircraft components. Monitoring systems provide for synchronized lifting and transport motions with up to four hoist units to ensure that even large and bulky assemblies are handled safely and reliably.
About Terex Material Handling
Terex Corporation is one of the world’s leading suppliers of crane technology with Demag industrial cranes and crane components. The core competence of the Terex Material Handling business group lies in the development, design and production of technically sophisticated cranes, hoists and components and the provision of services for these products. The business group manufactures in 16 countries on five continents and is present in more than 60 countries, reaching customers in more than 100 countries.
About Terex Corporation
Terex Corporation is a diversified global manufacturer engaged in the mechanical and plant engineering sector. A core activity of Terex Corporation is the provision of reliable, customer-driven solutions for many applications, including the construction, infrastructure, shipping, transportation, quarrying, mining, refining, energy, utility and manufacturing industries. Terex reports in five business segments: Aerial Work Platforms, Construction, Cranes, Material Handling & Port Solutions and Materials Processing. Terex Financial Services offers a wide range of products and services to assist in the acquisition of Terex equipment. Please visit our websites www.demagcranes.com and www.terex.com for further information.