NTT Electronics to Exhibit New Products at “BIRTV 2009”

Real-time codec solutions

• target="_blank">

  Professional 4:2:2 IRD “HVD6100”

  • HVD6100 is the world's first professional IRD that combines decoder functionality with support for AVC/H.264 HDTV, 4:2:2 chroma with a DVB-S2 demodulator. The decoder function supports multi-format (AVC/H.264 and MPEG-2, 4:2:2/4:2:0 chroma and HDTV/SDTV) and comes equipped with a variety of features such as HDTV to SDTV down-conversion. The demodulator function supports DVB-S2, DVB-DSNG and DVB-S formats for high-performance satellite transmissions.

• target="_blank">AVC/H.264 HDTV/SDTV encoder/decoder “HV9100 Series”

  • With an AVC/H.264 CODEC LSI chipset built-in that supports 4:2:2 Chroma, the HV9100 Series provides high-quality and low latency in a wide range of bit rate. It supports MPEG-2 format for smooth transition from existing MPEG-2 equipment to the up-and-coming AVC/H.264 format.

Devices for transfer equipment

• target="_blank">

  AVC/H.264 HDTV real-time codec LSI supporting PCI Express interface “PINEA”

  • PINEA is a single-chip solution that delivers high-quality video compression and playback while reducing the processing load on personal computers and networks. It supports H.264/AVC, a next-generation video compression format that provides twice the compression of MPEG-2.

• target="_blank">Single-chip LSI for real-time transcoding from MPEG-2 to AVC/H.264 “Matiz”

  • The Matiz is an epoch-making LSI that implements MPEG-2 to MPEG-4 AVC/H.264 transcoding in a single chip. It can halve the bit rate and double the compression ratio, so HDTV or SDTV contents in MPEG-2 format can be easily stored and transmitted - while retaining premium video quality.

• target="_blank">Super-Compact Full High-Definition MPEG-2 Encoder Module “LibraENC Module”

  
  
  

• target="_blank">Super-Compact MPEG-2 SDTV Encoder Module/Decoder Module “SD Module”

  
  
  

  
  
  

Optical fiber cord

• target="_blank">Free Bending Optical Cord

  • * 2.5 mm minimum bending radius.
  • * Keep same optical characteristics as conventional fiber.
  • * User can handle this cord without special knowledge about optical fiber.
  • * Telecom Carrier / System bender can save both labor cost and deploy / maintenance cost after deployment.
  • * This smallest bend radius can make realize to minimize the size of optical transmission equipments.
  • * Free Bending Optical Cord is based on the newest fiber technology called as hole assisted fiber, holey fiber, micro-structured fiber and so on.