Toshiba Launches One-chip Microcontroller for Electric Energy Calculation and Communication Used in Smart Meters

TOSHIBA's picture
Printer-friendly versionPrinter-friendly versionPDF versionPDF version

August 7, 2014

TMPM411F20XBG

TOKYO – Toshiba Corporation (TOKYO: 6502) today announced the launch of a new one-chip microcontroller for a smart meter, "TMPM411F20XBG", as the latest addition to its line-up of TX04 series, the ARM® Cortex®-M4F core-based microcontrollers. Sample shipments start today.

A typical smart meter controller consists of an electricity calculation unit that measures current and voltage, a communication control unit that transmits and receives data with external equipment, and a display unit that outputs information to the display.

The new product incorporates two Cortex®-M4F cores to enable independent control of the measurement and communication units on one chip and reduce board space. In addition, security functions required for network communications—AES, SHA and ESG—are implemented. Tamper detection and interrupt detection at power failure are also implemented with super-low consumption power.

Toshiba is committed to developing microcontrollers that support and promote the widespread use of smart meters by electric utilities worldwide.

Applications

  • Smart meters
  • Devices with sensing and communication functions (Internet of Things)

Key Features of the New Product

  • Two built-in Cortex®-M4F. Maximum operation frequency is 80MHz.
  • Contains two independent bus-matrices for the measurement unit and communication unit. Software data in each unit is protected.
  • Standby current is 1µA or less.

    The following can be operated in standby mode:
    RTC operation, interrupt/tamper detection, and data backup

  • Enables an LCD to display in standby mode
  • Security function
  • Tamper resistance function

Specifications

Specifications TMPM411F20XBG
Sample price (Tax included) 1,500 yen
Main specifications CPU ARM® Cortex®-M4F (2 units)
Maximum frequency 80MHz
Internal memory Flash 2048 Kbytes
SRAM 290 Kbytes
Operating voltage 2.7 to 3.6V(1.5V to 3.6V in standby mode)
12-bit ADC 9ch
DMA 34ch (2unit)
16-bit timer 5ch
LCD driver 32 segment × 4 common
External interrupt 13ch
SSP 4ch
SIO/UART 6ch
Full UART 2ch
I2C 1ch
Package VFBGA193 (14mm × 14mm, 0.8mm pitch)
Note DMA: Direct Memory Access
1 Kbyte is calculated as 1024 bytes.

 

For more information about the product, please visit:

http://www.semicon.toshiba.co.jp/info/lookup.jsp?pid=TMPM411F20XBG&lang=en

For Toshiba's ARM Core-based Microcontrollers, please visit:

http://www.semicon.toshiba.co.jp/eng/product/micro/lineup/1273886_39415.html

 

* ARM and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere.

 

Customer Inquiries:
Mixed Signal IC Sales and Marketing Department
Tel: +81-44-548-2821

 

Information in this document, including product prices and specifications, content of services and contact information, is current on the date of the announcement but is subject to change without prior notice.

News Source : Toshiba Launches One-chip Microcontroller for Electric Energy Calculation and Communication Used in Smart Meters
Copy this html code to your website/blog to embed this press release.